Consolidation

PRODUCT MODEL:
S5500 - Front Loading Oedometer (Consolidation) Set
S5501 - Bench for Consolidation for 3 Oedometer
S5502 - Bench for Consolidation for 1 Oedometer
S5503 - Oedometer
S5504 - Consolidation Cell for High Pressure, Ø 50 mm
S5505 - Calibration disc for Ø 50 mm consolidation cell (S5504), stainless steel
S5506 - Consolidation Cell for High Pressure,ASTM Ø 63.5 mm (2.5”)
S5507 - Calibration disc for Ø 63,5 mm consolidation cell (S5506), stainless steel
S5508 - Consolidation Cell for High Pressure, BS/EN, Ø 75 mm
S5509 - Calibration disc for Ø 75 mm consolidation cell (S5508), stainless steel
S5514 - Set of Weight for Consolidation - 50 kg (3x10 kg + 2x5 kg + 3x2 kg + 2x1 kg + 3x500 g + 2x250 g)
S5518 - Set of Weight for Consolidation - 80 kg (Set of Weight for Consolidation, 80 kg (6x10 kg + 2x5 kg + 3x2 kg + 2x1 kg + 3x500 g + 2x250 g)

PRODUCT STANDARDS:
BS 1377 | ASTM D2435, D3877, D4546 | AASHTO T216
The Consolidation test is used to determine the consolidation characteristics of soils of low permeability. The S5000 Front Loading Oedometer is rigidly constructed to ensure minimum frame distortion. The frame is designed to load the specimen through a lever arm assembly and one of three alternative beam ratios as 9:1, 10:1 and 11:1. The beam is fitted with a counter balance weight and beam support jack. The cell platform will accept the complete range consolidation cells and is fitted with a central spigot to ensure accurate centering of the cell under the loading.
The fixed ring consolidation cells are manufactured from corrosion-resistant materials and conform to the requirements of the relevant standards. An integral water reservoir is incorporated in the cell which allows the specimen to be inundated when required. All cells are supplied complete with upper and lower porous disc, pressure pad and cutting (specimen) ring.
Consolidation cell, dial gauge or displacement transducer and data logger, bench, weights, apparatuses for prepare Consolidation samples and calibration disc should be ordered separately.
Front Loading Oedometer (Consolidation) Set is supplied complete with;
• Oedometer - 3 pcs
• Bench for Consolidation, 3 Oedometer Capacity - 1 pcs
• Consolidation Cell for High Pressure, ASTM Ø 63.5 mm (2.5”) - 3 pcs
• Calibration Disc for Ø 63,5 mm Consolidation Cell - 3 pcs
• Set of Weight for Consolidation - 80 kg (6x10 kg + 2x5 kg + 3x2 kg + 2x1 kg + 3x500 g + 2x250 g)
• Analog Dial Gauge, 30x0.01 mm - 3 pcs

Cell P.Code

S5504

S5506

S5508

Aplication

High Pressure

ASTM

BS/EN

Specimen Diameter

50 mm

63.5 mm

75 mm

Specimen Area

1963 mm

4.906 inch

4416 mm

Beam Ratio

10:1

11:1

9:1

Total Load

64 kg

64 kg

80 kg

Stress

32 kg/cm`

20 t/ft`

16.3 kg/cm`

Stress for 1 kg

0.5 kg/cm`

0.3125 ton/ft`

0.2/cm`

Dimensions (wxlxh)

750x850x1400 mm

Weight

180 kg

P. Code

Sets of Weight for Consolidation

S5510

16 kgf Set

(2) 5 kg, (1) 2 kg, (2) 1 kg, (3) 0,5 kg, (2) 0,25 kg

S5512

32 kgf Set

(1) 10 kg, (3) 5 kg, (2) 2 kg, (1) 1 kg, (3) 0,5 kg, (2) 0,25 kg

S5514

50 kgf Set

(3) 10 kg, (2) 5 kg, (3) 2 kg, (2) 1 kg, (3) 0,5 kg, (2) 0,25 kg

S5516

64 kgf Set

(4) 10 kg, (3) 5 kg, (2) 2 kg, (3) 1 kg, (3) 0,5 kg, (2) 0,25 kg

S5518

80 kgf Set

(6) 10 kg, (2) 5 kg, (3) 2 kg, (2) 1 kg, (3) 0,5 kg, (2) 0,25 kg

 

  • Collecting tray